Table of Contents
Advertisement
Select the color of the wall behind the display and
the display will modify the Ambilight colors to appear as
they are intended.
Set Ambilight to switch off immediately or slowly fade
out when you switch off the display
Settings > Display &
Sound > Ambilight > Advanced > Display switch off >
Fade out to off / Immediate switch off.
Warm white tuning
Settings > Display &
Sound > Ambilight > Advanced > Warm white tuning.
The Warm white tuning tunes and locks your preferred
color for Ambilight. When Ambilight style > Follow
color> Warm white is unlocked, you can tune and lock
white color variations of Ambilight.
Ambilight Extension
Philips Wireless Home Speakers
Note: Before starting the setup, make sure the display
and your Philips Wireless Home Speakers are
connected to the same Wi-Fi network.
With Ambilight extension, you can set up your Philips
Wireless Home Speakers to follow the colors of
Ambilight. Before starting the setup, make sure your
Philips Wireless Home Speakers are turned on and
connected to the same Wi-Fi network as the display.
Please give some time for the speakers to be ready if you
have just turn it on before starting.
Press and hold the LED link button on the speaker for 3
seconds to start linking. If you have more than 1 speaker,
repeat the same action for each speaker and press BACK
key when you are done. The LED link button is located at
the Philips Wireless Home Speakers.
Switch on/off Philips Wireless Home Speakers working
with Ambilight
Settings > Display & Sound > Ambilight > Philips
Wireless Home Speakers > Enable/Disable.
Configure
Settings > Display & Sound > Ambilight > Philips
Wireless Home Speakers > Configure.
Configure the Philips Wireless Home Speakers to work
with Ambilight. Follow the instructions on screen to link
maximum of 10 Speaker LEDs to your display. For each
linked Speaker LED, you can select the color zone to
follow relative to the display and adjust the brightness of
the light.
View configuration
Settings > Display & Sound > Ambilight > Philips
Wireless Home Speakers > View configuration.
View the current setup of the Philips Wireless Home
Speakers working with Ambilight, network and Speaker
LEDs.
Reset configuration
Settings > Display & Sound > Ambilight > Philips
Wireless Home Speakers > Reset configuration.
Reset current setup of the Philips Wireless Home
Speakers.
Sunrise Alarm
Sunrise alarm uses Ambilight, music and weather
information for a new wake up experience.
• Display wakes up at selected time and day set by you.
• Lights up Ambilight with fade-in colored screen and
music.
• Slowly transit to weather forecast with matching
backdrop.
To enter the Sunrise alarm setting menu:
1 - Press to open Quick Menu.
2 - Select Sunrise alarm and press OK to open it.
- Alarm: set multiple alarms up to 5, for repeat/select
days, On/Off settings.
- Backdrop: follow weather or select from photo
categories.
- Music: music track to play during wake up.
- Switch on volume: music volume to set during wake
up.
- Weather: settings for local weather forecast.
- Preview: you can preview the wake up effect.
If display in standby and alarm time is reached, display
shall wake up from standby. Wake-up screen fade-in,
Ambilight is On, music fade-in and then show weather
information with backdrop.
To exit Sunrise alarm, press
or HOME key on remote control.
-
Standby / On: exits the Sunrise app and
switch display to standby.
- Back: exits the Sunrise app and switch to last
viewed display source.
- HOME: exits the Sunrise app and switch to launcher.
- If Sunrise alarm is not exited to other application after
30 min since Sunrise wake-up, display shall auto
33
Standby / On, Back
Advertisement
Table of Contents
