Nikon Z8 User Manual page 428

6
Name the new profile.
To proceed to the next step without changing the default
name, press X.
Whatever name you choose will appear in the network
menu [Connect to FTP server] > [Network settings] list.
To rename the profile, press J. For information on text
entry, see "Text Entry" (
entering a name.
There may be a delay before the camera detects the USB-
to-Ethernet adapter. If the camera is unable to detect an
Ethernet connection, the wizard will be configured to begin
creation of a wireless LAN profile with the default name
"WLAN1". Tap Z or press 4 to return to Step 4, wait about
10 seconds, and then try again.
7
Obtain or select an IP address.
Highlight one of the following options and press J.
Option
[Obtain
automatically]
[Enter manually]
8
Press J to proceed when the "configuration complete" message is displayed.
67). Press X to proceed after
0
Select this option if the network is configured to supply the IP address
automatically. A "configuration complete" message will be displayed
once an IP address has been assigned.
Enter the IP address and sub-net mask manually.
Press J; you will be prompted to enter the IP address.
Rotate the main command dial to highlight segments.
Press 4 or 2 to change the highlighted segment and press J to save
changes.
Next, press X; a "configuration complete" message will be displayed.
Press X again to display the sub-net mask.
Press 1 or 3 to edit the sub-net mask and press J; a "configuration
complete" message will be displayed.
354
Description
FTP Servers: Connecting via Ethernet