Nikon Z8 User Manual page 405

6
Obtain or select an IP address.
Highlight one of the following options and press J.
Option
[Obtain
automatically]
[Enter manually]
7
Press J to proceed when the "configuration complete" message is displayed.
8
Start pairing.
When prompted, launch the Wireless Transmitter Utility on the
computer.
Select this option if the network is configured to supply the IP address
automatically. A "configuration complete" message will be displayed
once an IP address has been assigned.
Enter the IP address and sub-net mask manually.
Press J; you will be prompted to enter the IP address.
Rotate the main command dial to highlight segments.
Press 4 or 2 to change the highlighted segment and press J to save
changes.
Next, press X; a "configuration complete" message will be displayed.
Press X again to display the sub-net mask.
Press 1 or 3 to edit the sub-net mask and press J; a "configuration
complete" message will be displayed.
331
Description
Computers: Connecting via Ethernet