Nikon Z8 User Manual page 797

Creating and Saving Fine-Tuning Values
1
Attach the lens to the camera.
2
Select [AF fine-tuning options] in the setup menu, then highlight [Fine-tune and save
lens] and press 2.
An AF fine-tuning dialog will be displayed.
3
Press 4 or 2 to fine-tune autofocus.
Choose from values between +20 and −20.
The current value is shown by g, the previously-selected value by o.
If a zoom lens is attached, you can choose separate fine-tuning values for maximum angle
(WIDE) and maximum zoom (TELE). Use 1 and 3 to choose between the two.
The larger the fine-tuning value, the farther the focal point is from the lens; the smaller the
value, the closer the focal point.
4
Press J to save the new value.
723
AF Fine-Tuning Options