Installer Options - Bosch Dinion2X Installation And Operation Manual

Dinion2X IP Camera
– In Manual mode the Red, Green, and Blue gain can be
manually set to a desired position.
Speed
Adjust the speed (Fast, Mediumor Slow) of the white balance
control loop.
R-gain
Offsets factory white point alignment (reducing red introduces
more cyan).
ATW and AWBhold (-5 to +5): adjusts the Red gain to optimize
the white point.
Manual (-50 to +50): adjusts the Red gain.
B-gain
Offsets factory white point alignment (reducing blue introduces
more yellow).
ATW and AWBhold (-5 to +5): adjusts the B gain to optimize the
white point.
Manual (-50 to +50): adjusts the Blue gain.
G-gain
Manual (-50 to +50): adjusts the Green gain.
It is only necessary to change the white point offset for special
scene conditions.
Saturation
Adjusts the color saturation; -15 gives a monochrome image.
9.6.7

Installer Options

Synchronization
Select the Synchronization method for the camera:
– Line lock to lock to the power supply frequency;
– Internal for free running camera operation.
Ticker bar
Switches a ticker bar on the live image on or off.
Bosch Security Systems
This manual downloaded from http://www.manualowl.com
Installation and Operation Manual
Advanced Mode | en
AR18-10-B006 | v1.1 | 2010.06
75