Table of Contents
Advertisement
CLEARANCES
INSTALLATION LOCATION REQUIREMENTS
S
A location where there are no obstacles near inlet and outlet
area.
S
A location which can bear the weight of indoor unit.
S
Do not install indoor units near a direct source of heat such
as direct sunlight or a heating appliance.
S
A location which provides appropriate clearances as
outlined in Fig. 5.
INDOOR UNIT INSTALLATION CONSOLE
SIZE 12
INSTALL THE MOUNTING HOOKS
1. The mounting hooks should be located horizontally and
level on the wall. All minimum clearances shown in Fig. 5
should be maintained.
2. Anchor the hooks at the specified location on the wall using
the mounting screws (see Fig. 5). Anchor the hooks on wall
studs.
Fig. 5 - Anchor the hooks
3. Once the hooks are secured, lift the unit and mount it on
the hooks. Be sure the hooks are on the correct mounting
locations on the back of the unit (see Fig. 6).
Fig. 4 - Indoor Unit Clearance
Hook
Tapping
screw
Washer
＜6mm
Fig. 6 - Hang the indoor unit
7
Hook
Tapping screw
Washer
<6mm
Advertisement
Table of Contents
