Setting Ratings - RCA VC125HF User Manual

Adjusting Settings
DVD SETUP
TV Aspect Ratio
Language/Audio Setup
Rating Control
Still Mode
Black Level
Alt Video Out
________________________
To Move To Select
GO BACK to Go Back
RATING CONTROL
Require Password
Changing Password
Change Rating Level
________________________
To Move To Select
GO BACK to Go Back
CHANGE RATING LEVEL
Password Required For:
Level 2
1
Child
________________________
To Change Level
Press ENTER To Finish
48

Setting Ratings

4:3 LB
Ratings let you block playback of DVDs based on their content. If a DVD
[None]
exceeds the set rating, an error message appears. Setting a rating sets the DVD
Auto
High
so that a password is required to view any DVD or to change ratings.
Off
To set or change a rating:
1. Press the SETUP/ENTER button on the remote.
2. Use the up and down arrows to point to DVD Setup and press the right
arrow to select it.
Note: In DVD-controlling mode, the DVD Setup Menu can only be accessed
when no disc is playing. To make sure the disc is not playing, press the
remote control's DVD button, and then the STOP button.
3. Use the up and down arrows to point to Rating Control and press the right
Yes
arrow to select it.
4. If you have previously set the rating, the Enter Password screen appears,
and you should enter your 4-digit password using the number buttons on
the remote.
If you have not previously set the rating, press the right arrow to change
the No to Yes. You should then enter a new password.
6. Use the up and down arrows to point to Change Rating Level and press the
right arrow to select it.
7. Use the left and right arrows to select a rating from the following list:
8
Adult
Note: All ratings above the level you select will also be blocked. For
example, if you block at level 6, then levels 7 and 8 will also be blocked.
Level Rating
1 G (General Audience).
2
3 PG (Parental Guidance suggested).
4 PG-13
5
6 R (Restricted)
7 NC-17
8
Chapter 4