Remove The Solid-State Drive (Ssd) Plate (L Or R) - Lenovo Legion Pro 7i Hardware Maintenance Manual

Hide thumbs Also See for Legion Pro 7i:
Table of Contents

Advertisement

Step 3.
Pry up the latches and then remove the lower case.
Figure 4. Pry up the latches and remove the lower case
Go to
https://support.lenovo.com/partslookup
part:
Lower case

Remove the solid-state drive (SSD) plate (L or R)

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Figure 5. Disconnect the battery pack cable from the system board
Step 2.
Remove the screws and then remove the SSD plate (L or R) carefully.
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
29

Advertisement

Table of Contents
loading

This manual is also suitable for:

Legion pro 716irx8h

Table of Contents