Remove The Solid-State Drive (Ssd) Plate - Lenovo Legion 5 Hardware Maintenance Manual

Hide thumbs Also See for Legion 5:
Table of Contents

Advertisement

Screw specifications
M2 x L8
M2 x L4
Step 3.
Pry up the latches and then remove the lower case.
Figure 6. Pry up the latches and remove the lower case
Go to
https://support.lenovo.com/partslookup
part:
Lower case

Remove the solid-state drive (SSD) plate

Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 32
Step 1.
Disconnect the battery cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Figure 7. Disconnect the battery cable from the system board
Step 2.
Remove three screws and then remove the SSD plate carefully.
Number of screws
7
4
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
33

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents