Step 3.
Pry up the latches and then remove the lower case.
Figure 4. Pry up the latches and remove the lower case
Go to
https://support.lenovo.com/partslookup
part:
Lower case
Remove the solid-state drive (SSD) plate
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Figure 5. Disconnect the battery cable from the system board
Step 2.
Remove three screws and then remove the SSD plate carefully.
Note: If your computer includes two SSD drives, there are two SSD plates.
to look up the Lenovo part number of the following replacement
.
Chapter 4
Removing a FRU or CRU
29