Screw specifications
M2 x L5
Go to
https://support.lenovo.com/partslookup
part:
Battery pack
Remove the solid-state drive (SSD) plate
Make sure the following FRU (or CRU) has been removed.
"Remove the lower case" on page 28
Step 1.
Disconnect the battery pack cable from the system board.
Attention: Use your fingernails to pull the connector to unplug it. Do not pull the cable.
Step 2.
Remove one screw and then remove the SSD plate.
Figure 6. Remove the SSD plate
Screw specifications
M2 x L3.5
Step 3.
Remove the SSD thermalpad.
Figure 7. Remove the SSD thermalpad
Go to
https://support.lenovo.com/partslookup
replacement parts:
Solid-state drive (SSD) plate
Solid-state drive (SSD) thermalpad
30
Hardware Maintenance Manual
Number of screws
5
to look up the Lenovo part number of the following replacement
Number of screws
1
to look up the Lenovo part numbers of the following