THOMSON grass valley VIPER LDK 5490 User Manual page 43

All manuals and user guides at all-guides.com
2
Top indicators
REC lights (red) when the camera is recording. It flashes while the
recording system is preparing to record.
TAPE flashes when only about 5 minutes or less of tape is left. It
lights continuously when the tape is at an end.
BATT flashes when battery voltage is low. It lights continuously
when battery voltage is less than 11V.
ND/RE lights when an ND optical filter or the range extender is
selected.
FOC+ lights when the focus assist funtion in the viewfinder is
switched on. Flashes when viewfinder zoom is on.
3
Iris indication
Indicates the value of the iris opening (when enabled in the VF menu).
4
Zebra pattern
This diagonal line pattern warns the operator that the area affected has
risen above a predetermined level of the full scale video exposure
value. Level and contrast are selected in the VF menu.
5
Safe area marker
The safe area marker indicates an area that represents 80% of the whole
viewfinder picture area.
6
Non standard indicator
The non-standard video settings indicator (!) lights when exposure is
not set to nominal. It also lights when black stretch, clean scan, AWC
or FL colour temperature, or extended iris is on.
Controls FilmStream mode 4-13