Table of Contents
Advertisement
All manuals and user guides at all-guides.com
Access control
The owner's card or the PIN code is used to access special set-up and
security features of the camera. Inserting the owner's card into the
camera gives direct access to the Security menu. If you select the
Security menu without this card inserted, you must enter the correct
PIN code to gain access to this menu.
User levels
Four user levels can be set in the security menu. These restrict access,
in varying degrees, to the operational controls. The appendix indicates
which functions are available at each user level.
1
1
Camera card slot
Insert your camera card into this slot with the chip on the card facing
the front of the camera. Push the card home until it fits snugly.
A camera card is not required for normal operation of the camera.
Note
Only use an original camera card.
Store the owner's card in a safe place.
Introduction
FilmStream mode
1-7
Advertisement
Table of Contents
