Scope; Organization - Garmin GTS 8 Series Maintenance Manual

1.1 Scope

This document provides maintenance instructions and Instructions for Continued Airworthiness (ICA) for
the GTS 8XX Traffic System as installed under STC SA02121SE. This document satisfies the requirements
for continued airworthiness as defined by 14 CFR Part 23.1529 and 14 CFR Part 23 Appendix G.

1.2 Organization

The following outline briefly describes the organization of this manual:
Section 2: System Description
This section provides a description of the equipment installed by this STC. An overview of the GTS 8XX
system interface is also provided.
Section 3: Control and Operation
This section provides basic control and operation information in relation to maintenance practices. Basic
GTS configuration and software loading is also described.
Section 4: Instructions for Continued Airworthiness
This section provides instructions to maintain continued airworthiness of the GTS 8XX system and system
airworthiness limitations.
Section 5: Troubleshooting
This section provides troubleshooting information to diagnose and resolve problems with GTS 8XX
system equipment.
Section 6: Equipment Removal and Reinstallation
This section provides instructions for the removal and re-installation of GTS 8XX system equipment.
Section 7: Return to Service
This section specifies return to service procedures to be performed upon completion of maintenance of
GTS 8XX system equipment.
Appendix A: Aircraft Installation Record
This appendix is used to record information for a specific GTS 8XX system installation.
Appendix B: Electrical Bonding Procedures
This appendix provides special bonding procedures for non-metallic aircraft.
190-01279-01 GTS 8XX Part 23 AML STC Maintenance Manual
Rev. 2 Page 1-2