Nady Audio MM-242 - 4-Channel Stereo Mini Mixer Manual

Also See for MM-242:

Owner's manual (2 pages)

Owner's manual (2 pages)

Owner's manual (2 pages)

Table of Contents

Contents

1 Introduction
2 FEATURES
3 NOTICE
4 CONTROLS AND CONNECTIONS
5 SPECIFICATIONS
6 Documents / Resources
- 6.1 References
- 6.2 Download manual

Nady Audio MM-242 - 4-Channel Stereo Mini Mixer Manual

Introduction

This unit was developed using the expertise of professional sound engineers and working musicians. You will find that your new NADY MM-242 has superior performance and greater flexibility than any other mini mixers in its price range. Please read this manual carefully to get the most out of your new unit.
Thanks for selecting NADY AUDIO as your choice in mini mixer.

FEATURES

8 Mono 1/4" inputs with individual volume controls to be assigned to Stereo A and B outputs or Mono'd together and sent to both A and B outputs
Stereo 1/4" Master outputs with separate Master volume controls, over 25dB of gain, a S/N ratio of 95dB and frequency response from 20Hz-30KHz
Peak LED's for each group of input channels
MONO / STEREO mode selector switch
Heavy-duty steel construction with smooth-turn, ultra-stable pots and high quality jacks
Power on/off switch with LED indicator, 9VDC powered with either 9V alkaline battery or optional PAD-1 AC/DC external adapter

NOTICE

The information in this document is subject to change, as the Company may make changes to product in order to improve reliability, design, or function, without prior written notice. No part of this manual may be reproduced or transmitted in any form or by any means without the written permission of the company.
IN NO EVENT WILL THE COMPANY BE LIABLE FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES, WHETHER ARISING DIRECTLY OR INDIRECTLY, SUCH AS LOSS OF PROFIT OR GOOD WILL, THAT MAY BE SUFFERED IN CONNECTION WITH THE PURCHASE OF THIS PRODUCT OR FROM THE BREACH OF ANY REPRESENTATION OR WARRANTY.

CONTROLS AND CONNECTIONS

CHANNEL INPUTS — 1/4" unbalanced inputs designed for line level inputs.
CHANNEL VOLUME CONTROLS — These controls separately adjust the volumes of each input.
PEAK LED's — These LED indicators will light when the corresponding group of A or B input channels are 3dB below clipping (distortion). Note, the Peak LED's are pre Master Volume.
MASTER VOLUME CONTROLS — These controls adjust the volume of the A and B outputs. Each control adjusts all 8 signals when set to Mono mode.
MASTER OUTPUTS — A and B 1/4" unbalanced outputs.
MODE SELECT — Use this switch to select STEREO or MONO mode. In STEREO mode, A inputs are mixed to the A output and B inputs are mixed to the B output. In MONO mode, all A and B inputs are mixed together and sent to both A and B outputs which are controlled by the A and B Master Volume controls respectively.
POWER SWITCH — Use this switch to turn the mixer ON and OFF
(Note: Before turning on the unit, turn down the Master Volume of the mini mixer and the level controls of equipment connected to the outputs).
POWER LED — Lights when powered on.
BATTERY COMPARTMENT — For 9V alkaline or rechargeable battery
DC INPUT — Input socket for the optional PAD-1 9V AC/DC adapter.
When you use external DC power, the built-in battery power will turn off automatically.

SPECIFICATIONS

Input Impedance	50K ohms
Maximum Input	>10V (controls set minimum) 225mV (controls set to max)
Output Impedance	120 ohms
Maximum Output	+7dBm, 1.75V
Gain	>25dB
Frequency Response	20Hz - 30KHz
THD	0.07%
S/N	-95dB
Noise Floor	120uV
Inputs/Outputs	1/4" unbalanced
Peak LEDs	light 3dB before clipping
Current Drain	19mA
9V Battery Life	up to 35 hours
Power Requirements	9V battery or optional PAD-1 AC/DC adapter
Dimensions	5.8" x 4.3" x 2.1" (147 mm x 109 mm x 53 mm)
Weight	1.4 lbs (0.64 Kg)

SERVICE FOR YOUR NADY AUDIO PRODUCT
(U.S.) Should your NADY AUDIO product require service, please contact the Nady Service Department via telephone at (510) 652-2411, or e-mail at service@nady.com.
(International) For service, please contact the NADY AUDIO distributor in your country through the dealer from whom you purchased this product.
DO NOT ATTEMPT TO SERVICE THIS UNIT YOURSELF AS IT CAN BE DANGEROUS AND WILL ALSO VOID THE WARRANTY.

NADY SYSTEMS, INC.
6701 SHELLMOUND STREET, EMERYVILLE, CA 94608
Tel: 510.652.2411
Fax: 510.652.5075
www.nady.com