Table of Contents
Advertisement
Electronic weighing scale
[5] Service tools
Use the below service tools as exclusive tools for R32/R410A refrigerant.
Refer to the spec name plate on outdoor unit for the type of refrigerant being used.
No.
Tool name
1.
Gauge manifold
2.
Charge hose
3.
Electronic weighing scale
4.
Gas leak detector
5.
Adaptor for reverse flow check
6.
Refrigerant charge base
7.
Refrigerant cylinder
8.
Refrigerant recovery equipment
3
PARTS NAMES AND FUNCTIONS
3-1. Indoor (Main) Unit
Air outlet
Up/down guide vanes
Change the direction of airflow from the
vertical blower.
3-2. WIRED REMOTE CONTROLLER (OPTION) <PAR-40MAA>
Refer to "12-1. REMOTE CONROLLER FUNCTIONS" for details.
OCH753A
Specifications
· Use the existing fitting specifications . (UNF1/2)
· Use high-tension side pressure of 5.3 MPa·G or over.
· Use pressure performance of 5.09 MPa·G or over.
· Use the detector for R134a, R407, R410A, or R32.
· Attach on vacuum pump.
· R32 or R410A refrigerant
· Cylinder with syphon
Left/right guide vanes
Change the direction of airflow
from the horizontal blower.
8
Unit
―
―
―
Oil filter (Air intake)
It prevents oil from
getting into the unit.
Advertisement
Table of Contents
