Table of Contents
Advertisement
•
To remove the antenna, turn the antenna counterclockwise.
3.5
Turning the Radio On or Off
Procedure:
•
To turn on your radio, press and hold the Power/Info button.
NOTE: To turn on your radio when your radio is charging, press and hold the Power/Info
button.
The green LED illuminates and the display shows a power-on animation.
•
To turn off your radio, press and hold the Power/Info button.
3.6
Adjusting the Volume
Procedure:
•
To increase the volume level, press the Volume Up button.
•
To decrease the volume level, press the Volume Down button.
3.7
Activating the Preconfigured Wi-Fi Access Point (PWAP)
This feature provides a temporary Wi-Fi connection for the radio to download the configurations from
the portal. Instead of the manual configuration through the Maintenance Mode Web Server, you can
use the preconfigured Wi-Fi access point for initial Wi-Fi connection.
Prerequisites:
Ensure your radio is in the User Mode and has no internet connection.
NOTE: The following are the preconfigured Wi-Fi Access Point settings supported by the radio.
SSID
WaveRadio
Procedure:
To connect to the PWAP, press the Menu/ Programmable button and Volume Up button
simultaneously.
If the radio successfully connects to the PWAP, your radio shows the following indications:
Password
RadioManagement
MN005173A01-AD
Chapter 3 : Getting Started
17
Advertisement
Table of Contents
