Turning Bluetooth On Or Off; Searching For Bluetooth Devices; Connecting To Bluetooth Devices - Motorola WAVE TLK 100 Manual

Hide thumbs Also See for WAVE TLK 100:
Table of Contents

Advertisement

MN005173A01-AD
Chapter 12 : Menu
At the fringe areas of reception, both voice and tone quality start to sound "garbled" or "broken". To
correct this problem, position your radio and Bluetooth-enabled accessory closer to each other (within
the 10 m defined range) to re-establish clear audio reception. The Bluetooth function of your radio has
maximum power of 2.5 mW (4 dBm) at the 10 m range.
Your radio can support up to three simultaneous Bluetooth connections with Bluetooth-enabled
accessory of unique types. For example, a headset, a scanner, a sensor device, and a PTT-Only
Device (POD). Multiple connections with Bluetooth-enabled accessory of the same type are not
supported.
Refer to the user manual of your respective Bluetooth-enabled accessories for more details on the full
capabilities of your Bluetooth-enabled accessory.
12.8.1

Turning Bluetooth On or Off

NOTE: Depending on the configuration of your radio, press or press and hold the Menu/
Programmable button to directly access the feature. Else, manually enter the feature with the
following procedure.
Procedure:
1 Press the Menu/Programmable button.
2 Locate the Bluetooth icon.
3 To turn on Bluetooth, press the Volume Up button. To turn off, press the Volume Down button.
If Bluetooth is on, the following occurs:
Voice Announcement sounds Bluetooth On.
The display shows a check mark beside the Bluetooth icon.
If Bluetooth is off, the following occurs:
Voice Announcement sounds Bluetooth Off.
The display shows an "X" mark beside the Bluetooth icon.
12.8.2

Searching for Bluetooth Devices

Procedure:
To search for other Bluetooth devices, press the Power/Info button until you see the Bluetooth
icon.
The radio displays Bluetooth Searching icon and Voice Announcement sounds Bluetooth
Searching.
12.8.3

Connecting to Bluetooth Devices

Procedure:
1 While searching, the radio search for the last connected Bluetooth accessory.
Once connected, an indication tone sounds from the connected Bluetooth accessory.
36

Advertisement

Table of Contents
loading

Table of Contents