Volvo XC90 TWIN ENGINE Owner's Manual page 517

3. Screw in the towing eye until it reaches its
end stop.
Screw the eye in firmly. For example,
thread through the wheel bolt wrench* and
use it as a lever.
IMPORTANT
It is important that the towing eye is firmly
screwed into place - right in until it stops.
Removing the towing eye
Unscrew and remove the towing eye after
–
use and return it to its place in the foam
block.
Finish by refitting the cover onto the
bumper.
Related information
Towing (p. 513)
•
Recovery (p. 515)
•
Tool kit (p. 593)
•
STARTING AND DRIVING
Recovery
For recovery, the car is taken away with the
help of another vehicle.
Call a recovery service for recovery assistance.
The towing eye can be used to pull the car up
onto a recovery vehicle with a flatbed plat-
form.
IMPORTANT
Note that cars with Twin Engine must
always be transported raised up with all
the wheels on the recovery vehicle's plat-
form.
Applies to cars with level control*: If the car
is equipped with air suspension, this must be
disabled before the car is raised. Deactivating
the function via the centre display.
1. Press Settings in the top view.
2. Press My Car Parking Brake and
Suspension.
3. Select Disable Leveling Control
The car's position and ground clearance deter-
mine whether it is possible to pull it up onto a
flatbed platform. If the slope of the recovery
vehicle's ramp is too steep, or if the ground
clearance under the car is inadequate, then
the car may be damaged if you try to pull it up.
* Option/accessory.
.
}}
515