Volvo XC90 TWIN ENGINE Owner's Manual page 155

In general, the system works by listening for a
basic command which is followed by more
detailed commands that specify what you
want the system to do.
To change the system audio volume, turn the
rotary volume knob when the voice speaks. It
is possible to use other buttons during voice
control. However, other sounds will be
silenced during dialogue with the system,
which means that it is not possible to execute
any functions linked with audio using the but-
tons.
Cancel voice control
Voice control can be cancelled in different
ways:
Tap briefly on and say "
•
Give a long press on the steering wheel
•
button for voice control
two beeps. This stops voice recognition
even when the system is speaking.
Voice control is also cancelled if you do not
reply during a dialogue. The system will first
ask for a reply three times and if there is still
no response then voice control will be cancel-
led automatically.
To speed up communication and skip the
prompts from the system, press the steering
16 Applies to certain markets.
17
Note that this only stops the dialogue when the system is not speaking. To do that, give a long press on
wheel button for voice control
cels the system voice and you can say the next
command.
Example of voice recognition control
Press
1.
2. Say " Call [Forename] [Surname]
[number category]
Smith Mobile
> The system dials the selected contact
from the phonebook. If the contact has
several phone numbers (e.g. home,
mobile, work), the right category must
be referred to.
Commands/phrases
The following commands can generally be
Cancel
".
used, regardless of the situation:
" Repeat
•
until you hear
tion in the ongoing dialogue.
Cancel
"
•
" Help " - starts a help dialogue. The sys-
•
tem replies with the commands available
in the current situation, a prompt or an
example.
Commands for specific functions such as
phone and radio are described in specific sec-
tions.
. This can-
.
", e.g. " Call Robin
".
" - repeats the last voice instruc-
17
" - discontinue the dialogue.
until two beep tones are heard.
DISPLAYS AND VOICE CONTROL
Digits
The number commands are stated differently
depending on the function to be controlled:
Phone numbers and postcodes must be
•
spoken individually, number by number,
e.g. "zero, three, one, two, two, four, four,
three" (03122443).
House numbers can be spoken individu-
•
ally or in groups, e.g. "two, two" or
"twenty-two" (22). For English and Dutch,
several groups can be said in sequence,
e.g. "twenty-two, twenty-two" (22 22).
For English, double or triple can be used,
e.g. "double zero" (00). Numbers can be
given within the range 0-2300.
Frequencies can be spoken as "ninety
•
eight point eight" (98.8), "a hundred and
four point two" or "hundred four point
two" (104.2).
}}
153