Volvo XC90 TWIN ENGINE Owner's Manual page 473

IMPORTANT
To prevent damage to any drive system
components, the working temperature of
the gearbox is checked. If there is a risk of
overheating, a warning symbol illuminates
in the driver display and a text message is
shown - follow the recommendation given.
Symbols in the driver display
If a fault should occur in the gearbox, the
driver display shows a symbol and a message.
Symbol Specification
Information or error message for
gearbox. Follow the recommen-
dation given.
Hot or overheated gearbox. Fol-
low the recommendation given.
Reduced performance
eration performance reduced
In the event of a temporary pow-
ertrain fault, the car can go into a
Limp home mode with reduced
engine power to prevent damage
to the powertrain.
Related information
Gear positions for automatic gearbox
•
(p. 471)
Changing gear with steering wheel pad-
•
dles* (p. 473)
Gear selector inhibitor (p. 474)
•
Kick-down function (p. 475)
•
Gear shift indicator (p. 475)
•
/ Accel-
STARTING AND DRIVING
Gear positions for automatic
gearbox
With an automatic gearbox, an appropriate
gear is selected automatically depending on
the need for speed and power.
Changing gear
The gear selector is the shift-by-wire-type
where shifting is performed electronically
instead of mechanically. This means simpler
shifting and more distinct gear positions.
Overview of gear lever and gear positions.
Change gear position by pressing the spring-
loaded gear selector forwards or backwards,
or sideways for manual shifting.
* Option/accessory.
}}
471