Volvo XC90 TWIN ENGINE Owner's Manual page 321

Selecting and activating cruise
control
The cruise control function (CC
be selected and activated in order to be able
to regulate the speed.
In order to start the cruise control from the
standby mode, the car's current speed must
be 30 km/h (20 mph) or higher.
Press ◀ (1) or ▶ (3) to scroll to the symbol
1.
for cruise control (4).
> The symbol is grey – cruise control is in
standby mode.
34 Cruise Control
35 Cruise Control
2. When cruise control is selected – press
the steering wheel button
vate.
34
) must first
> The symbol is white – cruise control is
started and the current speed is stored
as maximum speed. The lowest speed
that can be stored is 30 km/h
(20 mph).
Reactivating cruise control to the last
stored speed
When cruise control is selected – press
–
the steering wheel button
> The cruise control markings and sym-
bols in the driver display change colour
from GREY to WHITE — the car will
now follow the most recently stored
speed again.
WARNING
A significant increase in speed may follow
when the speed is resumed with the
steering wheel button.
Related information
Cruise control (p. 317)
•
Deactivating cruise control (p. 319)
•
Standby mode for cruise control (p. 320)
•
Deactivating cruise control
(2) to acti-
Cruise control (CC
switched off.
to activate.
Press the steering wheel button
1.
> The symbol and indicators turn grey –
cruise control is set in standby mode.
2. Press the steering wheel button ◀ (1) or ▶
(3) to change to another function.
> The driver display's symbol and indica-
tor for cruise control (4) are switched
off – which deletes the stored maxi-
mum speed.
DRIVER SUPPORT
35 ) can be deactivated and
(2).
}}
319