Toro 323000001 Operator's Manual page 11

Adjusting the Air Speed of
the Blower
To achieve maximum performance (air speed), fully
depress the variable-speed trigger, then press and
hold the turbo boost button for the desired amount of
time (Figure 8).
To adjust the air speed as you blow, use the
variable-speed trigger
To maintain the current air speed, engage the speed
lock (Figure 8).
Shutting Off the Blower
To shut off the blower, disengage the speed lock (if in
use) and release the variable-speed trigger
Important:
After stopping the blower, do not
leave the speed lock engaged with the battery
pack in the blower.
Whenever you are not using the blower or are
transporting the blower to or from the work area,
remove the battery pack.
Removing the Blower Tube
Press down on the tab latch to separate the blower
tube from the blower (Figure
1. Tube latch
(Figure 8).
(Figure
9).
Figure 9
Removing the Battery from
the Blower
Press the battery latch to release the battery pack and
slide the battery pack out of the blower
8).
1. Battery latch
g273159
11
(Figure
Figure 10
10).
g267488