Main Menu Setting - Q-See QSDF8204C4-320 User Manual

3.2 Main Menu Setting

There is an administrator setup in the DVR. The administrator has control
over all settings. The username is "Admin", and default password is "123456".
Steps of entering the Main Menu are:
Notice : The instructions in the examples are the steps using the Remote Control. If using
a mouse the operation may be easier, you would follow the instructions in dialogue boxes and
navigate through menu items. If using the front panel buttons you cannot control PTZ
cameras, but the other operations are the same as the remote control.
STEP1 Press the "Menu" button, input username and password in the
Login interface (as Fig. 3.1), and then you will see the Main Menu (as Fig.
3.2).
STEP2 Move the cursor, and the selected items will be highlighted in
yellow
STEP3 Press "Enter" key to enter the sub-menu, and press "Menu" key to
get back to Main Menu
The structure of the main menu is shown in Fig 3.3.
MENU
12
QSDF8204 Digital Video Recorder User Manual
Fig 3.1 Login
BASIC CONFIG
LIVE CONFIG
RECORD CONFIG
ALARM CONFIG
PTZ CONFIG
USER CONFIG
NETWORK
MANAGER TOOLS
Fig 3.3 Structure of Main Menu
MOTION ALARM
SENSOR ALARM
OTHER ALARM
BASIC CONFIG
IP CONFIG
DDNS CONFIG
Fig 3.2 Main
SHUTDOWN SYSTEM
DISK MANAGEMENT
SYSTEM LOG
SYSTEM INFO
UPDATE FIRMWARE
LOAD DEFAULT
CLEAR ALARM OUT