Table of Contents
Advertisement
1886
Insert grommets found in the
hardware bag into the
holes in the blades, then secure each blade to a blade arm
with screws found in the
hardware bag.
Repeat x5
7
Ceiling Bracket
Downrod
Installing the Canopy
Lift the canopy into place so that
the screw holes are aligned.
Installing the Blades:
Hanging Fan
Wiring
Insert the two canopy screws
found in the
hardware bag.
Lightly attach the blade arms to the motor with
the blade arm screws, then securely tighten
after both screws are attached.
Repeat x5
Canopy
Blades
x2
Canopy Screw
Canopy Screw
bag
x15
Blade Screw
bag
x15
Grommet
bag
Remember the screws that
you kept after removing the
shipping blocks? You need
them here.
x10
Blade Arm Screw
Note:
Fan style may vary.
Light
Glass/Bulbs
Advertisement
Table of Contents
