Menu Level 1: Set Temperature - Dometic COOLAIR SP950T Installation Manual

Configuration of unit software
8.2

Menu level 1: Set temperature

The unit always starts with a defined value for the room temperature. This
parameter can be configured between 17 and 30 °C (62 and 86 °F).
➤ Start configuration mode (chapter "Starting and ending configuration mode"
on page 23).
✓ The first digit of the display shows the menu level and the second and third
show the parameter which can be set.
➤ Press the
➤ Use the + and – buttons to select the target value (in °C) at which the unit
should start operation.
✓ The digits in the display flash until the parameter you entered is confirmed.
➤ Press the
✓ The set value is saved and is then used when the unit is restarted.
✓ You are now in menu level 1 again and can use the + and – buttons to switch
between menu levels.
24
button to change the parameters.
button to confirm your entry.
CoolAir SP950T
EN