General safety instructions CoolAir SP950C, SPX1200C Please read this instruction manual carefully before installation and first use, and store it in a safe place. If you pass on the product to another person, hand over this instruction manual along with it.
CoolAir SP950C, SPX1200C Target group for this manual Before starting the system, check that all the parts belonging to the scope of delivery are present. Target group for this manual The installation information in this manual is only intended for qualified personnel at workshops, who are familiar with the guidelines and safety precautions to be applied during the installation of vehicle accessory parts.
Page 7
Guarantee CoolAir SP950C, SPX1200C Fit the fastening frame and the condenser at the MAN TGA/TGX XLX, XXL as follows: NOTE Only install the condenser unit after you have attached the mounting frame on the rear wall of the truck. ➤ Insert and tighten the four M8 x 30 bolts, eight U washers M8 8.4 x 16 mm and four M8 retaining nuts (fig.