Suzuki FU150MF Owner's Manual page 107

Tai Nguyen; ; 06.02.2022 22:42.
7. Before reinstalling the oil filter cap, be
sure to check that the filter spring 8 and
the "O" ring 9 are installed correctly.
NOTE: Insert a new "O" ring each time the
filter element is replaced.
8. Replace the oil filter cap and tighten the
bolts securely but do not overtighten
them.
9. Replace the drain plug gasket 3 with a
new one. Reinstall the drain plug 2 and
gasket 3. Tighten the plug securely with
a torque wrench. Pour fresh oil through
the filler hole. Approximately 1400 ml will
be required.
Drain plug tightening torque:
18 N·m (1.8 kgf-m)
NOTE: About 1300 ml of oil will be required
when changing oil only.
Engine damage may occur if you use oil
that does not meet Suzuki's specifica-
tions.
Be sure to use the oil specified in the
FUEL, ENGINE OIL AND COOLANT REC-
OMMENDATIONS section.
6-35
NOTICE