Procedure For Returning To Service - Suzuki FU150MF Owner's Manual

Tai Nguyen; ; 06.02.2022 22:42.
2. Clean the outside of the battery with a
mild soap and remove corrosion from the
terminals and wiring harness.
3. Store the battery in a room above freez-
ing.
TIRES
Inflate tires to the normal pressure.
EXTERNAL
• Spray all vinyl and rubber parts with rub-
ber protectant.
• Spray unpainted surfaces with rust pre-
ventative.
• Coat painted surfaces with car wax.
MAINTENANCE DURING STORAGE
Once a month, recharge the battery. The
standard charging rate is 0.5A × 5 to 10
hours.
PROCEDURE FOR RETURNING TO
SERVICE
1. Clean the entire motorcycle.
2. Remove the oily rags from the air
cleaner intake and muffler outlet.
3. Drain all the engine oil. Install a new oil
filter and fill the engine with fresh oil as
outlined in this manual.
4. Remove the spark plug. Turn the engine
a few times. Reinstall the spark plug.
5. Reinstall the battery by referring to the
BATTERY section.
6. Make sure that the motorcycle is prop-
erly lubricated.
7. Perform the INSPECTION BEFORE
RIDING as listed in this manual.
8. Start the motorcycle as outlined in this
manual.
8-3