Storage Procedure - Suzuki FU150MF Owner's Manual

Tai Nguyen; ; 06.02.2022 22:42.
STORAGE PROCEDURE AND
MOTORCYCLE CLEANING

STORAGE PROCEDURE

If your motorcycle is to be left unused for an
extended period of time, it needs special
servicing requiring appropriate materials,
equipment and skill. For this reason, Suzuki
recommends that you trust this maintenance
work to your Suzuki dealer. If you wish to
service the machine for storage yourself, fol-
low the general guidelines below:
MOTORCYCLE
Clean the entire motorcycle. Place the
motorcycle on the center stand on a firm, flat
surface where it will not fall over.
FUEL
1. Fill the fuel tank to the top with fuel
mixed with the amount of gasoline stabi-
lizer recommended by the stabilizer
manufacturer.
2. Run the engine for a few minutes until
the stabilized gasoline fills the fuel injec-
tion system.
ENGINE
1. Pour one tablespoon of motor oil into
each spark plug hole. Reinstall the spark
plug and crank the engine a few times.
2. Drain the engine oil thoroughly and refill
the crankcase with fresh engine oil all
the way up to the filler hole.
3. Cover the air cleaner intake and the muf-
fler outlet with oily rags to prevent humid-
ity from entering.
BATTERY
1. Remove the battery from the motorcycle
by referring to the BATTERY section.
8-2