Table of Contents
Advertisement
Operation
Spray Tip Installation
To avoid serious injury from skin injection
do not put your hand in front of the spray tip
when installing or removing the spray tip
and tip guard.
1.
Perform Pressure Relief Procedure,
page 12.
2.
Use spray tip to insert seal into tip
guard. Insert Spray Tip.
3.
Screw assembly onto gun. Tighten.
3A4187C
0
0
ti29114a
ti29115a
ti29465a
Spray
1.
Spray test pattern. Adjust pressure to
eliminate heavy edges.
2.
Use smaller tip size if pressure
adjustment cannot eliminate heavy
edges.
3.
Hold gun perpendicular, 10-12 in. (25-30
cm) from surface. Spray back and forth;
overlap by 50%.
4.
Trigger gun after moving. Release
trigger before stopping. For additional
spraying information, see separate gun
manual.
Operation
ti24669a
ti24673a
19
Advertisement
Table of Contents
