Graco 3A4133 Operation - Repair - Parts page 18

Startup
7. Hold gun against grounded metal waste
pail. Trigger gun until paint appears.
8. Move gun to paint pail and trigger for 20
seconds. Release trigger and allow
sprayer to build pressure. Engage
trigger lock.
20s
18
1m
High-pressure spray is able to inject toxins
into the body and cause serious bodily
injury. Do not stop leaks with hand or rag.
9.
ti29650a
10. Screw tip assembly onto gun and
ti29572a
Inspect for leaks. If leaks occur, perform
Pressure Relief Procedure, page 12,
then tighten all fittings and repeat Startup
procedure. If there are no leaks continue
with the next step.
tighten. See Spray Tip Installation,
page 19. For gun assembly instructions,
see separate gun manual.
ti29465a
3A4187C