Jabra Elite 65e - Bluetooth Headsets Manual

Welcome

Jabra Elite 65e features

• Active Noise Cancellation (ANC) to reduce disturbances
• Power battery to fuel all-day use (up to 13 hours on a 2 hour charge)
• Dual-connectivity to two Bluetooth devices, enabling you to take calls and listen to music on two devices using the same earbuds
• Up to 10 meters / 33 feet of wireless range for true mobility
• Vibrating call alert to ensure you never miss a call
• HearThrough feature: Hear the conversations around you at the touch of a button

Jabra Elite 65e overview

Included accessories

How to wear

Jabra Elite 65e is designed to be worn around the neck.
The earbuds have three microphones: one on each of the earbuds and one on the cable. For the optimal call experience, position the microphone on the cable as close to your mouth as possible, and wear both earbuds in your ears.

Getting the correct fit

The earbuds are supplied with three EarGel and EarWing sizes: large, medium and small.

It is highly recommended to mix and match the different EarGel and EarWing sizes to find the best combination for your ear. The correct fit will feel tight and will seal out background noises.

Attaching the EarWings and EarGels

1. To attach an EarWing, align the indent on the EarWing with the ridge on the earbud (as illustrated), and stretch the EarWing over the earbud. It will fit perfectly in the groove when properly attached.
2. Firmly press the EarGel onto the earbud, ensuring it is angled correctly (as illustrated).

Using the magnetic earbuds

The earbuds are magnetic, and connect together for convenient cable and power management. When the earbuds are connected, your music will be paused or your call will be ended. Separating the earbuds will answer an incoming call.

How to charge

To charge the earbuds, connect a USB charging cable to the USB charging port on the neckband. It is recommended to charge the earbuds using the supplied Jabra charging cable, however it is possible to charge the earbuds using your smartphone charger.
It takes approx. 2 hours to fully charge the earbuds.

Note: Always clean and dry the USB charging port before charging the earbuds. It is recommended to recharge the earbuds at least once a month.

What the LEDs mean

Status LED

	Full
	Medium
	Low
	Very low
	Pairing mode
	Resetting

ANC/ HearThrough LED

	ANC on
	HearThrough on

How to connect

Power on/off

On: Hold the Multi-function button for 1 second. The LED will flash green, and the neckband will vibrate.
Off: Hold the Multi-function button for 3 seconds. The LED will flash red, and the neckband will vibrate.

Pairing with a smartphone

1. Ensure the earbuds are powered off, and then hold (3 secs) the Multi-function button until the LED flashes blue and you hear an announcement in the earbuds.
   
   
2. Wear the earbuds and follow the voice-guided pairing instructions.

How to use

Calls & music

Calls & music
	Power on	Hold (1 sec) the Multi-function button
	Power off	Hold (3 sec) the Multi-function button
	Play/pause music	Press the Multi-function button, when listening to music
	Answer/end call	Press the Multi-function button
	Reject call	Double-press the Multi-function button
	Answer/end call or pause music	Detach/attach the Magnetic earbuds
	Adjust volume	Press the Volume up or Volume down button, when listening to music or on a call
	Next track	Hold (1 sec) the Volume up button (smartphone only)
	Previous track	Hold (1 sec) the Volume down button (smartphone only)
	Battery status	Press the Volume up or Volume down button, when not listening to music or on a call
	Siri or Google Now	Press the Mute/Voice button, when not on a call
	Mute/un-mute microphone	Press the Mute/Voice button, when on a call
	Cycle between ANC and HearThrough modes	Press the ANC/ HearThrough button

Active Noise Cancellation (ANC)

The earbuds use Active Noise Cancellation (ANC) to reduce outside disturbance, allowing you to fully focus.
Press the ANC/HearThrough button to cycle through the available options.

HearThrough

Voice guidance

Voice guidance are announcements intended to guide you or give earbud status updates (e.g. connection and battery status).
How to turn voice guidance On/Off
Voice guidance is enabled by default.

Voice Guidance On: Ensure the earbuds are powered on, and then hold the Mute/Voice button for 5 seconds.

Voice Guidance Off: Ensure the earbuds are powered on, and then hold the Mute/Voice button for 5 seconds.

Siri or Google Now

Phone voice commands enable you to speak to Siri or Google Now on your smartphone using your earbuds. For more information on using Siri or Google Now, please refer to your smartphone's user manual.

Phone voice commands
	Activate Siri or Google Now (phone dependent)	Press the Mute/Voice button, when not on a call

Voice assistant settings can be configured using the Jabra Sound+ app.

Multiple call handling

The earbuds can answer or reject calls when you are already on a call.

Multiple call handling
	End current call and answer incoming call	Press the Multi-function button
	Put current call on hold and answer incoming call	Hold (1 secs) the Multi-function button
	Switch between held call and active call	Hold (1 secs) the Multi-function button
	Reject incoming call, when on a call	Double-tap the Multi-function button

Vibrate alert

The earbuds will vibrate whenever they are powered on/off, connected to your smartphone or computer, or when there is an incoming call.

How to reset

Resetting the earbuds clears the list of paired devices and all earbud settings.
After resetting, it is necessary to re-pair the earbuds to your smartphone.

Reset
	Reset the pairing list	Ensure the earbuds are powered on and you are not on a call. Then simultaneously hold the Volume up button and the Multi-function button for 5 seconds. You will then need to re-pair the earbuds.

Jabra Sound+ app

Jabra Sound+ app

	Customize your music
	Manage HearThrough
	Register your 2-year warranty

The Jabra Sound+ app also enables you to:

• Firmware update the earbuds
• Manage voice prompts
• Enable/disable vibration

Support

FAQ

View the FAQs on Jabra.com/elite65e.

How to care for your earbuds

• Always store the earbuds with the power off and safely protected.
• Avoid storage at extreme temperatures (above 50°C/122°F or below -10°C/14°F). This can shorten battery life and may affect the earbuds.
• Regularly clean the metal mesh on each earbud to avoid them becoming blocked.

jabra.com/elite65e