Jabra Pro 925 - Headset with Mobile Device Manual

WELCOME

JABRA PRO 925 FEATURES

• Plug and play simplicity
• Wireless freedom – up to 100m/300ft from base
• 12 hours talk-time

PRODUCT OVERVIEW

HEADSET

BASE

FOLDABLE BASE STAND
The Jabra PRO 925 base stand can be folded into three positions: open, closed and standing.

OPTIONAL ACCESSORIES

The following Jabra PRO accessories are available separately. Visit jabra.com for a full accessory overview.

CHARGE THE HEADSET

The headset will charge when docked in the base, and the base is connected to a power supply.

It takes approx. 3 hours to charge the headset.

HEADET BATTERY STATUS

WHAT YOU SEE	BATTERY LEVEL
	High
	Medium
	Low
	Very low
	Battery charging

HOW TO WEAR

The Jabra PRO 925 headset can be worn in three different wearing-styles:

• Headband
• Earhook (optional accessory)
• Neckband (optional accessory)

All wearing-styles can be worn on either the left or right ear.
NOTE: It is important to position the microphone close to the mouth for maximum noise cancellation.

HEADBAND

EARHOOK (OPTIONAL ACCESSORY)

NECKBAND (OPTIONAL ACCESSORY)

NOTE: The neckband or earhook can be purchased on jabra.com

HOW TO CONNECT

CONNECT TO DESK PHONE (WITH HEADSET PORT)

1. Connect the base to a power supply.
2. Plug the supplied telephone cable into the port marked on the base.
3. Connect the telephone cable to the headset port on the desk phone.
4. Dock the headset in the base.

CONNECT TO DESK PHONE (WITHOUT HEADSET PORT)

1. Connect the base to a power supply.
2. On the desk phone, unplug the handset cable from the phone body.
3. Connect the handset cable to the port marked on the base.
4. Plug the supplied telephone cable into the port marked on the base.
5. Connect the telephone cable to the handset port on the desk phone.
6. Dock the headset in the base.

HOW TO USE

	FUNCTION	ACTION
	Headset on/off	Press (1 sec) the Multifunction button to turn on. Press (3 secs) to turn off
	Answer/end call	Tap the Multi-function button
	Reject call	Double-tap the Multifunction button
	Initiate call	Tap the Multi-function button when not on a call
	Adjust speaker volume	Tap the Volume up or Volume down button
	Mute/un-mute	Tap the Mute button

MULTIPLE CALL HANDLING

The headset can accept and handle multiple calls.

	CALL FUNCTION	HOW TO DO IT
	End current call and answer incoming call	Tap the Multi-function button
	Switch between held call and active call	Press and hold (2 secs) the Multi-function button
	Put current call on hold and answer incoming call	Press and hold (2 secs) the Multi-function button
	Reject incoming call, and continue active call	Double-tap the Multifunction button

VOICE GUIDANCE

The headset plays a variety of voice announcements to indicate status and connection guidance.

BASE LED INDICATORS

The Jabra PRO 925 base has three LEDs to indicate battery, call status and events.

LED	EVENT
	Battery charging (slow flash)
	Full battery
	Low battery
	Very low battery (fast flash)
	Sleep mode (slow flash)
	Unknown battery status
	Microphone muted
	Active audio link between headset and base
	Searching for headset

SOFTWARE

JABRA DIRECT

Jabra Direct is software designed to support, manage and enable optimal functionality for Jabra devices.
Download the latest version - jabra.com/direct

UPDATE FIRMWARE

Updating firmware improves performance or adds new functionality to your Jabra PRO 925.
To update firmware:

1. Connect to a PC using a USB cable (not supplied).
2. Download and install Jabra Direct.
3. Check for the latest firmware via Jabra Direct. You will receive notifications whenever there is an update for your device.

ADVANCED SETTINGS

Six advanced settings can be configured using the headset.

• Mute reminder tone
• Open phone line on undock
• Intellitone
• Wireless range
• Remote call control
• Wideband audio

CHANGE THE ADVANCED SETTINGS

1. Wear the headset, and simultaneously press and hold (5 secs) the volume buttons on the headset until you hear 'setup', and then release the buttons.
2. Tap the Multi-function button to cycle through the settings (see table below). Each setting will be announced in the headset. To change a setting, use the volume buttons to cycle through the setting values, and tap the Multi-function button to select the value.
3. When finished, simultaneously press and hold (5 secs) the volume buttons until you hear 'goodbye', then release the buttons. The base will reset and update the settings.

LIST OF ADVANCED SETTINGS

SUPPORT

FAQ

View the full FAQ on Jabra.com/pro925.

HOW TO CARE FOR YOUR JABRA DEVICE

• Always store the headset with the power off.
• Avoid storage at extreme temperatures (below -20°C/-4°F or above 45°C/113°F).
  This can shorten battery life and may affect speaker operation.
• Do not expose the headset or base to rain or other liquids.

TECHNICAL SPECIFICATIONS

www.jabra.com/pro925