Adjusting Trim Angle (Power Trim And Tilt) - Yamaha F40D Owner's Manual

1
1. Trim operating angle
EMU27883
Adjusting trim angle (Power trim and
tilt)
EWM00752
WARNING
Be sure all people are clear of the out-
G
board motor when adjusting the tilt an-
gle. Body parts can be crushed
between the motor and the clamp
bracket when the motor is trimmed or
tilted.
Use caution when trying a trim position
G
for the first time. Increase speed gradu-
ally and watch for any signs of instabil-
ity or control problems. Improper trim
angle can cause loss of control.
If equipped with a power trim and tilt
G
switch located on the bottom cowling,
use the switch only when the boat is at
a complete stop with the engine off. Do
not adjust the trim angle with this
switch while the boat is moving.
Adjust the outboard motor trim angle using
the power trim and tilt switch.
1. Power trim and tilt switch
ZMU03633
1. Power trim and tilt switch
1. Power trim and tilt switch
To raise the bow (trim-out), press the switch
UP
DN
Operation
1
ZMU03634
47