Toyotomi CTN/CTG-328W User Manual page 41

9K,12K,18K,24K Heat Pump Type:
NOTE
The wiring board is for reference only, please refer to the actual one.
4. Put wiring cover back and then tighten the screw.
5. Close the panel.
Step 8: Bind up pipe
1. Bind up the connection pipe,
power cord and drain hose with
the band.
2. Reserve a certain length of drain
hose and power cord for installation
when binding them. When binding
to a certain degree, separate the
indoor power and then separate
the drain hose.
3. Bind them evenly.
4. The liquid pipe and gas pipe should be bound separately at the end.
NOTE
• The power cord and control wire can't be crossed or winding.
• The drain hose should be bound at the bottom.
yellow
blue black brown
green
Outdoor unit connection
indoor unit
connection pipe
indoor power cord
41
indoor and
outdoor power cord
gas
pipe
liquid pipe
band
drain hose
drain hose band
GB