Table of Contents
Advertisement
Appendix
Screen display messages (continued)
L1)NO LINE
L2)NO LINE
Line 1 Incoming cal l
Line 2 Incoming cal l
Microphone ON
Microphone off
No signal, cal l ended
Not available at this time
Out of range OR
no power at base
Paging al l handsets
**Paging**
Place handset in charger
Ringer muted
Saved
Unable to cal l try again
Unable to save
There is no telephone line connected on line 1.
There is no telephone line connected on line 2.
There is an incoming call on line 1.
There is an incoming call on line 2.
MUTE is turned off and the person on the
other end can hear you.
You have turned off the handset microphone.
The other party cannot hear you but you can
hear the other party.
Communication between the system handset
and telephone base is lost during a call.
One system handset or the telephone base is
already viewing the call log or directory and
another handset/telephone base attempts to
review it.
The system handset cannot communicate with
the telephone base. Check the telephone base
power connection or move closer.
The telephone base is paging handset(s).
The system handset is paged.
The battery is very low. Place the system
handset in the telephone base for recharging.
The ringer is muted temporarily during an
incoming call.
Your selection has been saved.
You try to make an intercom call but the
system handset/telephone base you are calling
is in the directory, in the call log, on an outside
call, or the system handset is out of range.
You try to save a caller ID entry with no name
or number.
68
Advertisement
Table of Contents
