Table of Contents
Advertisement
Directory
26
If there are no stored entries, LIST
EMPTY will be displayed.
If you try to store a new entry and the
directory is full, you will hear an error
tone and FULL will be displayed.
If the number you store has more than
11 digits, the display shows
left of the number to indicate more
digits ahead.
Insert a pause in a number
You may need to do this if you are
connected to a switchboard. When
entering a number, usually after
entering the switchboard access code
(e.g. 9) press and hold
appears in the display.
Writing tips
If you make a mistake, press
Right soft key C to delete the last
character or digit.
Press
repeatedly to enter the
following: SPACE – 1
Press * repeatedly to enter the
following symbols: * ? / \ ( )
Press
repeatedly to enter the
following symbols: # ' , - . &
If the next letter is on the same button
that you have just pressed, wait until
the cursor moves to the right before
trying to enter it.
If you experience any problems, please call the Helpline on Freephone 0800 218 2182* or visit www.bt.com/producthelp
You can store up to 20 names and numbers in the directory of
each of your BT Freelance XD7500 handsets for quick and
easy dialling. Numbers can be up to 20 digits long. Directory
entries are stored alphabetically.
Store a number
to the
1. Press
2. Press Left soft key
3.
NAME
keypad and press
4.
NUMBER
until P
keypad and press
5. Press
name/number and press Left soft key
6. Press Right soft key
Entering names
Use the keypad to enter the letters shown on the buttons,
e.g. to store DAN:
1. Press
2. Press
3. Press
to open the directory. The first entry is displayed.
,
is displayed, press
ADD
is displayed, enter the name for the entry using the
to store.
OK
is displayed, enter the number for the entry using the
to save.
OK
or
to select a ringtone to associate with the
to return to standby.
once to enter D.
once to enter A.
twice to enter N.
to select.
OK
to confirm.
OK
Advertisement
Table of Contents
