Radio Operation - Pyle PLCD87 Owner's Manual

OPERATION
• SET THE CLOCK
Press and hold DSP button (15), until
the clock is shown on the display and
flashes, then press the TUNE/TRACK
button (17) to change minutes or
TUNE/TRACK
change hours.
• SELECT MODE
Press MODE button (6) shortly to
choose desired listening mode.
(e.g. radio mode to CD mode to
AUX IN mode)
The unit can be connected a portable
audio player through the AUX IN jack
(back of the unit).
• MUTE
Press MU button (3) to silence the
receiver. Press it again to release the
mode.
• LIQUID CRYSTAL DISPLAY
Exhibit current frequency and activated
functions on the display (25).
• EQUALIZATION
Press P-EQ button (11) to turn on
equalization function and to select
desired audio mode. There are five
kinds of mode as below:
FLAT CLASSICS
• REMOTE SENSOR
Point the remote control handset to
the remote sensor IR (12).
Press the function keys on the handset
to control the system.
• RESET
RESET button (26) must be activated
with either a ball point pen or thin metal
object. The RESET button is to be
activated for the following reasons:
- Initial installation of the unit when all
wiring is completed.
- All the function buttons do not
operate.
- Error symbol on the display.
button (16) to
POP M ROCK M DSP OFF
Note: If press RESET button (26), the
unit can't work yet, please use a cotton
swab soaked in isopropyl alcohol to
clean the socket on the back of the
front panel.

RADIO OPERATION

• BAND SELECTION
At tuner mode, press BND/LOU button
(13) to select the desired band.
The reception band will change in the
following order:
FM1
• STATION SELECTION
Press TUNE/TRACK
or TUNE/TRACK
shortly to activate automatic seek
function. Press for several seconds
until "MANUAL" appeared on the
display, the manual tuning mode is
selected. If both buttons have not
pressed for several seconds, they will
return to seek tuning mode and
"AUTO" appeared on the display.
• LOCAL/DISTANCE
Press LO button (2) to select between
local and distant stations.
Local setting for reception of strong
station, and a distant setting for
reception of weaker stations.
This function is effect dring AUTO
SEEK operation.
• MONO/STEREO
Press MONO button (1) to select mono
or stereo mode. You can sometimes
improve reception of distant staions by
selecting mono operation.
8
FM2 FM3 AM
button (16)
button (17)