Table of Contents
Advertisement
ECO (available under cool mode only)
Under cooling mode press ECO, the controller will adjust the
temperature automatically to 24 °C with a fan speed of auto to save
energy. Modifying the mode or adjusting the set temperature less than
24 °C will stop the ECO operation. Under ECO, the set temperature
should be 24 °C or above, it may result in insufficient cooling. If you
feel uncomfortable press the ECO button again to stop it.
Menu -> up or down buttons -> function icon -> enter -> ECO
Sleep
This function gently regulates the set temperature to prevent
excessive, draft free, heating or cooling during sleep. It allows the
set temperature to increase or decrease 0.5-1 °C in an hour, up to a
maximum of 2 °C above or below the set point (over a 10 hour period).
The fan is on auto.
Menu -> up or down buttons -> function icon -> enter -> Sleep
ECO
F
E
t
t
i
t
M
f
| 21
Advertisement
Table of Contents
