Air Shroud; Removing The Air Shroud; Installing The Air Shroud - Dell PowerEdge XR8620t Installation And Service Manual

Air shroud

Removing the air shroud

Prerequisites
CAUTION: Never operate your system with the air shroud removed. The system may get overheated quickly,
resulting in shutdown of the system and loss of data.
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
Steps
Holding the air shroud at both the ends, and lift the air shroud out of the system.
Figure 18. Removing the air shroud
Next steps
Replace the air shroud.

Installing the air shroud

Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
Steps
1. Align the guide pins on the system with guides on the air shroud.
2. Lower the air shroud into the system until it is firmly seated.
NOTE: Ensure the air shroud and cables do not interfere each other.
54 Installing and removing system components
Safety instructions.
Before working inside your system
Safety instructions.
Before working inside your system
.
.