Fisher & Paykel OR60 Installation Instructions And User Manual page 5

Safety and warnings
3
The switch must always be accessible.
The power supply cable must not touch any hot parts and must be positioned so that it does not
O
exceed 75 C at any point.
To connect the cooker to the mains, do not use adapters, reducers or branching devices as they
can cause overheating and burning.
This cooker must be connected to a suitable double pole control unit adjacent to the cooker. No
diversity can be applied to this control unit.
If the electrical supply cord is damaged, it must only be replaced by an authorised person.
This cooker must be connected to electrical supply using V105 insulated cable.
The cooker must be earthed.