H3C S3100-8TP-SI Installation Manual page 35

Port Status LED
Table 1-12 describes the Link/Act LED of the auto-sensing 10/100Base-TX port.
Table 1-12 Description of the Link/Act LED on the S3100-TP-SI and S3100-TP-EI series
LED
Link/Act LED (green)
Table 1-13 describes the Speed LED of the 10/100Base-TX port.
Table 1-13 Description of the 10/100Base-TX port Speed LED of the S3100-TP-SI and S3100-TP-EI
series
LED
Auto-sensing 10/100Base-TX
port speed LED (green)
For the description of the Link/Act LED of the Combo port on the S3100-TP-SI and the S3100-TP-EI
series, see Table 1-12. When the port is connected correctly, the Speed LED indicates the operating
speeds of the Combo port, as shown in
Table 1-14 Description of the Combo port Speed LED of the S3100-TP-SI and the S3100-TP-EI series
LED
100/1000Base-X
SFP port
Combo port
Speed LED
(green)
Auto-sensing 10/100/1000Base-T port
For the description of the Link/Act LED of the 100/1000Base-X SFP port and Auto-sensing
10/100/1000Base-T port on the S3100-52TP-SI, see
the Speed LED indicates the operating speeds of the port, as shown in
Status
ON The port is connected properly.
The port is in the active state and there is traffic
Blinking
on the port.
The port is not connected or is incorrectly
OFF
connected.
Status
ON The port is operating at 100 Mbps.
OFF The port is operating at 10 Mbps.
Table 1-14.
Operating port
Connected to a
1000 Mbps optical
module
Connected to a
100 Mbps optical
module
Table
1-33
Description
Description
Status Description
The port is operating at
ON
1000 Mbps.
The port is operating at 100
OFF
Mbps.
The port is operating at
ON
1000 Mbps.
The port is operating at
OFF
10/100 Mbps.
1-12. When the port is connected correctly,
Table 1-15.