H3C S3100-8TP-SI Installation Manual page 12

Table of Contents

Advertisement

Combo port. For each Combo port, either the SFP port or the corresponding 10/100/1000Base- T
Ethernet port can be used at a time.
Figure 1-5
shows the front panel of an S3100-16TP-SI Ethernet switch.
Figure 1-5 Front panel of an S3100-16TP-SI Ethernet switch
(1)
(7)
(8)
(1) Auto-sensing 10/100Base-TX port Speed LED (green)
(2) Auto-sensing 10/100Base-TX port
(4) Auto-sensing 10/100/1000Base-T port
(6) 100/1000Base-X SFP port
(8) Power LED (PWR)
For details about LEDs on the front panel, refer to section
S3100-TP-EI
Series".
Rear panel
Figure 1-6
shows the rear panel of an S3100-16TP-SI Ethernet switch.
Figure 1-6 Rear panel of an S3100-16TP-SI Ethernet switch
(1) Grounding screw
Power system
S3100-16TP-SI Ethernet switches support AC input.
Rated voltage range: 100 VAC to 240 VAC, 50 Hz/60 Hz
Input voltage range: 90 VAC to 264 VAC, 47 Hz to 63 Hz
Cooling system
The S3100-16TP-SI cools off naturally.
(2)
(3) Combo port Speed LED (green)
(5) Console port
(7) LINK/ACT LED (green)
(2) AC input terminal block
1-10
(3)
(4)
(6)
(7)
"Front Panel LEDs of the S3100-TP-SI and
(1)
(2)
(5)

Advertisement

Table of Contents
loading

Table of Contents