Consumption (Ecofeedback) - Miele PFD 100 SmartBiz Operating Instructions Manual

Settings 
Deleting the energy tariff times
You can delete the settings for an
energy tariff time and in doing so
deactivate the EcoStart
time zone.
 Use the  sensor controls to select
an electricity tariff time T1–T3 that
you wish to delete and confirm with
OK.
 For example, select
confirm with OK.
 For example, select
confirm with OK.
The settings for the energy tariff time
selected will be reset.
 Confirm the message with OK.
The energy tariff time will be deleted.
98
option for this
Delete T1 and
Delete T1? and

Consumption (EcoFeedback)

You can set whether the water
consumption is displayed for the
selected programme. This function
shows the estimated consumption
before a programme sequence and the
actual consumption after the end of the
programme.
In this menu you can also call up the
total consumption of water for all the
wash programmes you have previously
run on your dishwasher (see the
"EcoFeedback consumption display"
section in the "Caring for the
environment" chapter).
Displaying Consumption
 Select the
Consumption display
option and confirm with OK.
 Select the setting you want and
confirm with OK.
Displaying Total consumption
 Select the
Total consumption
option and confirm with OK.
 You can display the total
consumption via the
option.
You can reset the value for the total
consumption to 0.
 Select the
Reset
confirm with OK.
 Select the
Yes
confirm with OK.
 Confirm the message with OK.
The values are now reset to 0.
menu
menu
Water menu
menu option and
menu option and