Consumption (Ecofeedback) - Miele G 7410 SC Operating Instructions Manual

Settings
Deleting the electricity tariff times
You can delete the settings for an elec-
tricity tariff time and in doing so deac-
tivate the EcoStart
zone.
 Use the  sensor controls to select
an electricity tariff time T1–T3 that
you wish to delete and confirm with
OK.
 For example, select
confirm with OK.
 For example, select
confirm with OK.
The settings for the electricity tariff time
selected will be reset.
 Confirm the message with OK.
The electricity tariff time will be deleted.
44
option for this time
Delete T1 and
Delete T1? and

Consumption (EcoFeedback)

You can set whether the energy and
water consumption is displayed for the
selected programme. This function
shows the estimated consumption be-
fore a programme, and the actual con-
sumption after the end of the pro-
gramme.
In this menu you can also call up the
total consumption of energy and water
for all the wash programmes you have
previously run on your dishwasher (see
"Caring for the environment" chapter,
"EcoFeedback consumption "display
section).
Display Consumption
 Select the
Consumption display
option and confirm with OK.
 Select the setting you want and con-
firm with OK.
Display Total consumption
 Select the
Total consumption
tion and confirm with OK.
 You can display the values for
using the  sensor con-
and Water
trols.
You can also reset the values for the
total consumption to 0.
 Select the
Reset
confirm with OK.
 Select the
menu option and con-
Yes
firm with OK.
 Confirm the message with OK.
The values are now reset to 0.
menu
menu op-
Energy
menu option and