Miele PFD 100 SmartBiz Operating Instructions Manual page 54

Programme options
Setting "Start at"
With the Start at function, you set the
exact time you want the programme to
start at.
 Use the  sensor controls to enter
the hour and confirm your entry by
touching OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the  sensor controls to enter
the minutes and confirm your entry
by touching OK.
The saved start time for the selected
programme will appear in the display for
several minutes.
When the set time is reached, the
selected programme will begin
automatically.
The time remaining will appear in the
display, the  sensor control will go
out and the Start sensor control will
light up.
54
Setting "Finish at"
Use the Finish at function to set the
latest time by which the selected
programme has to be finished.
 Use the  sensor controls to enter
the hour and confirm your entry by
touching OK.
The hour will be saved and the minute
number block will be highlighted.
 Use the  sensor controls to enter
the minutes and confirm your entry
by touching OK.
The estimated start time for the
selected programme will appear in the
display for several minutes.
A message will appear in the display if
the programme cannot be completed
by the set finish time because it has too
long a running time. It will show the
time that can be set.
 If it appears, confirm the message
with OK.
The selected programme will start
automatically when the estimated start
time is reached.
The time remaining will appear in the
display, the  sensor control will go
out and the Start indicator will light up.