Table of Contents
Advertisement
Figure 61. Removing the drive backplane
Next steps
1.
Replace the
backplane.
Installing the drive backplane
Prerequisites
1. Follow the safety guidelines listed in the
2. Follow the procedure listed in the
3. Remove the drives.
NOTE:
To avoid damaging the backplane, ensure to move the control panel cables from the cable routing clips before
removing the backplane.
NOTE:
Route the cable properly when you replace it to prevent the cable from being pinched or crimped.
Steps
1. Align the slots on the backplane with the hooks on the system.
2. Lower the backplane until the blue release tabs click into place.
Figure 62. Installing the backplane
Safety
instructions.
Before working inside your
PowerEdge R240 installing and removing system components
system.
79
Advertisement
Table of Contents
