Toyota Prius V 2016 Manual page 65

Installing child restraints using a seat belt (child restraint lock
function belt)
Rear facing Infant seat/convertible seat
■
1
Adjusting the angle of the
seatback.
While pulling the lever, fold the
seatback forward and then back
to the 1st lock position (most
upright position) until it locks into
place.
2
Place the child restraint sys-
tem on the rear seat facing
the rear of the vehicle.
3
Run the seat belt through the
child restraint system and
insert the plate into the
buckle. Make sure that the
belt is not twisted.
4
Fully extend the shoulder belt
and allow it to retract to put it
in lock mode. In lock mode,
the belt cannot be extended.
PRIUS v_OM_OM47B12U_(U)
1-1. For safe use
65
1