470
7-3. Do-it-yourself maintenance
5
Replace the light bulb, and
set the connector.
6
Install the bulb base.
Align the 3 tabs on the light bulb
with the mounting, and insert.
Turn the bulb base clockwise to
set.
Shake the bulb base gently to
check that it is not loose, turn
the headlight high beams on
once and visually confirm that
no light is leaking through the
mounting.
7
Install the cover and turn it
clockwise.
Align the
positioning mark of the light unit
and insert and turn it.
There is the positioning mark on
the outer side of the light unit.
PRIUS v_OM_OM47B12U_(U)
of the cover to the